Cylindrical Grinding Services

Cylindrical Grinding Services for OD and ID Features

Cylindrical grinding services at Nyalt Precision finish the outside and inside diameters of shafts, pins, sleeves and bores, on parts that have to rotate, slide or fit exactly. As a family-owned machine shop in Singapore with more than two decades of experience, we take on round work where size, roundness and finish all have to be right.

OD grinding and ID grinding are carried out in the same climate-controlled shop, under the same AS9100 quality system, as our CNC machining, so international customers in Europe and the US can source a finished, ground part from one supplier.

In short: OD and ID grinding for shafts, pins, sleeves and bores, including hardened parts and aerospace alloys, from an AS9100 and ISO 9001 certified shop.
2 µmon qualifying parts
0.1–0.4 µmtypical Ra, ID ground
24 hquote turnaround
No MOQone-off parts welcome
Cylindrical grinding services: a batch of OD ground parts made by Nyalt Precision

OD Grinding (External Cylindrical Grinding) for Shafts, Pins and Journals

Nyalt Precision grinds external diameters and cylindrical features to exact customer specifications, wherever a fit, a bearing seat or a running surface depends on size and roundness. Typical parts:

  • Shafts and journals
  • Pins and rollers
  • Bearing surfaces
  • Precision round stock

ID Grinding (Internal Grinding) for Bores and Sleeves

Internal diameters and bores on bushings, bearing races and sleeves are ground with the same consistency and accuracy, wherever the bore has to take its mating part cleanly.

Inside the Nyalt Precision machine shop in Singapore

Grinding Hardened Round Parts and Aerospace Alloys

Round parts often come to grinding after heat treatment, when hardness has gone up and the diameter has moved. Cylindrical grinding brings the part back to its final geometry, correcting distortion and removing scale, and heat treatment itself can be arranged through qualified vendors as part of the same order.

We grind the same difficult-to-machine aerospace materials we machine: titanium Ti-6Al-4V, Inconel 718 and 625, Rene 77, 17-4PH and 15-5PH stainless, aluminum, and hardened steels such as 440C at 54–58 HRC.

Surface Finish by Cylindrical Grinding Method

Ra values below are typical ranges, and what a diameter can hold depends on material, length and geometry, so we confirm it against your drawing before we quote.

Surface finish

Typical Ra by method

Starting points for engineers specifying ground features.

Grinding Method Typical Ra (microns) Typical Ra (microinches) Common Applications
OD grinding 0.2–0.8 8–32 Bearing ODs, journals and shaft diameters
ID grinding 0.1–0.4 4–16 Bores, bearing races, sleeve IDs
Cylindrical grinding 0.1–0.8 4–32 Pins, rollers, precision round stock

Quality Documents With Every Order

Nyalt Precision has been ISO 9001 certified since 2005 and AS9100 certified since 2010. Every order ships with FAI reports, a certificate of conformance (CoC), and material and mill certs, so each ground part traces back to its raw material.

“We can deliver the first article sample to your door within days, which will meet or exceed your requirements, or it will cost you nothing.”Our first-article guarantee
Round component with ground diameters made by Nyalt Precision

Request a Cylindrical Grinding Quote

Send a STEP file and a PDF drawing with quantity, material, finish and the certificates you need, and you will have a quote within 24 hours. NDAs are provided on request.

For flat faces and profiles, see our surface grinding services. For every grinding method we offer, see precision grinding services.

Frequently Asked Questions

Can you grind both the OD and ID on the same part?

Yes. Parts that need both are ground in the same shop, under one quality system.

What tolerance range can you hold for OD and ID grinding?

Within two microns, or 0.00008″, on qualifying parts. The figure depends on material, length and geometry, and we confirm it against your drawing at quote stage.

Do you take small or one-off cylindrical grinding jobs?

Yes. There is no minimum order, and work runs from one-off prototypes to low-volume production.

Will my part fit your cylindrical grinders?

Send us your drawing and we will confirm it fits before we quote. You can upload it on our request a quote page.

Which industries do you grind parts for?

Aerospace, automation, semiconductor equipment and marine, for customers in Europe, the US and Singapore, from one-off prototypes to low-volume production.

Contact us today for a free estimate.